|
| >>PRODUCT>>LASER CUTTING MACHINE>>YMC-300 |
| 1.Introduction |
YMC-300 Laser cutting machine is used to cut and drill the metal sheets, such as steel, copper, etc. It adopts double lamps assembled in UK-made ceramic cavity with higher laser beam power. The German CNC worktable leads to high cutting speed, accuracy, and excellent stability. With the industry oxygen, the cutting surfaces are smooth and clean. Moreover, the straight / curve cutting path provides sufficient flexibility.
|
.jpg) |
| 2. Features |
| ¡ñ Excellent beam quality and system reliability |
| ¡ñ Auto water cooling system |
| ¡ñ Precise CNC worktable |
| ¡ñ Friendly man-machine interface and simple operation
through software |
| 3. Technical Parameters |
| Wavelength |
1064 nm |
| Pump source |
Dual pulsed Xe lamp |
| Laser cavity |
Ceramic |
| Aiming laser |
Red |
| Discharge current |
100- 400 A |
| Discharge pulse width |
0.1 -10 ms |
| Max cutting depth |
Material dependable |
| Cutting width |
0.25-1 mm, material dependent |
| Cutting area |
Customizable as per requirements |
| Power supply |
3-phase 4-wire AC 380V ¡À 10%,50 Hz /60 Hz,PE,(A voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation) |
| Input power |
Max 15 kW |
| Main dimension |
1300 mm x 1150 mm x 550 mm |
| Cooling Dimension |
1500 mm x 1200 mm x 570 mm |
| Net weight |
~580 kg |
| Cooling Mode |
Water cooling |
|
| 4.Standard Configuration |
| Laser machine ¡Á 1 set |
| Water cooling unit ¡Á 1 set |
| Xe lamp ¡Á 2 |
| Operation manual (In English) ¡Á 1 |
|
|
|
